Hoover U6630-900 WindTunnel Bagless Upright Vacuum "vacuum shut down" Questions

...vacuum cleaners have a thermal (heat) sensitive shut off mechanism built in. This mechanism should prevent the burn out of the motor. If you run a vacuum too long with a clogged hose or clogged ...

...vacuum cleaner shut down when the bad was full. replaced the bag, now the cleaner will not start Its all good now. The vacuum just started working. I think it got overheated change your filters both ...

...Vacuum overheats and shuts off. If I let it cool down, it will restart OK. If it gets too hot it will shut down for about an hour...it does that to protect the motor. A lot of tools and work ...

...only a short time yes that unit has 2 sensors 1 on the motor and 1 on the relay board 1 of them is bad which is making the vacuum shut its like a heat sensors its malfuctioning it shuts the unit ...

...Vacuum Cleaner
no fuses in these ....double insulated

the motor has a thermal protection shut off when overheating
will start again when cooled down
empty bag often

if ...

...floor It may have overheated from a restriction or clog. If so it will come back on after it cools down. Just needs to cool down, when it reaches a certain temp. it'll shut off till it cools ...

vacum shuts down when suction starts vacuum shuts down when suction starts Try turning the knob on the top of the vac all the way to the right.

...Vacuum, Model EC-S2365 just stopped working in the middle of vacuuming. I'm not sure what happened and I can't turn it back on. Any suggestions? Just before it shut down were you pulling on the cord? ...

...Vacuum loses power while operating. Just shuts down and will not restart by toggling switch. After a brief (cool down?) period it will start. Is there a breaker/reset? Does it have a feature that ...

DYSON DC 25 SHUTS DOWN UNEXPECTEDLY? Machine shuts down in upright position when you try to use the wand. Will work in the down (vaccuming) position, but there is no suction to the wand. clean all ...