Question about Hoover Vacuums
...Some Wind Tunnels by Hoover have a poor design in the switch on the handle. Sometimes the switch does not turn on all the way and will stop running. Other times you can't turn the unit
...Wind Tunnel vacuum cleaner runs for a minute or two then turns off. (It does not respond to the on-off switch on the handle.) It will start again after a few minutes. The side filter has been removed ...
Wind Tunnel Mach 4.7 that is 8-9 years old. It will not turn on. We have not had any previous problems. Is there a reset button or is the motor just bad? Should I be happy it lasted this long? that is
...switch on a Hoover Wind tunnel? Hello! We recommend taking your vacuum into an authorized service center to have your on/off switch repaired or replaced. Follow the link to locate the nearest service ...
...Wind Tunnel Bagged Supreme mach 3.9. It keeps shutting itself offafter just a minute or so. Is there an overheat relay switch or someithing? Or any idea why it might be doing this. Thank you Teri ...
...wind tunnel model no. u-6476-910 when i push the off switch , there was no response. i took the handle apart and the on and off switch is stuck in the on position. can you help me. aubrey bennett get ...
How do I replace the on-off switch on a Hoover Wind Tunnel vacuum model U6630-9000? Take off the handle, then remove the tool compartment, then you can access the switch.
I have a hoover sh 40050 wind tunnel bagless canister vacuum that will not turn on First thing to check is cord and switch
...wind tunnel vacuum turn on First of all you have checked to make sure you are plugging into a outlet that has power correct ? If you have power at the outlet then when you activate the switch does it ...
243 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
146 Questions