Hoover U6630-900 WindTunnel Bagless Upright Vacuum "check belt stick vac" Questions

...belt is getting hot, then it is slipping instead of turning the brush roll. Check thge brush roll, make sure the ends are turning freely. Is the motor running ok? If it is then either the brush roll ...

...belt has broken. check the hose by removing it and drop a coin in one end and see if it comes out the other end , if not your hose is plugged. Try pushing a broom stick from the end of the hose that ...

...check for a clog. It could well be that there is a clog inside the machine after the dust channel from the beater bar and before the main hose assembly goes into the bin. Usually a wire brush or just ...

...belt connects to. Please help. Jann it connects to the left side with the little metal rod sticking out.then connect to the wooden roller. in the space without the brush on it. roll the wooden piece ...

burnt smell..not the belt...shaft and brushes are cleaned and moving...what is it! HELP! check your switch eureka's are bad about switch's burning up.

Check to see if the belt is loose, or over stretched. Check the brush roll as well and be sure its securely locked into place. It could be slightly loose causing a lack of communication between itself

...Belt-less brush does not turn forward to pick dirt up. I have a Kenmore Progressive up right vac I bought my parents the exact same model. Do you have the floor select switch "ON" for the brush? Did ...

...belt or not? I already have another vacumn so if it is going to cost too much to fix, I will just continue using the other one. Please let me know what the problem can be and I will try to fix it ...

...belt need to go back around another wheel or around that metal post that sticks out behind the roller brush? please go to the hoover vac store using the following link. you will have your exploded ...

...belt assembly. Remove the brush as check for hair binding the roller. Look at th ed belt to see if its crazed. When installed, the belt should be very tight and not slip. If either the belt or brush ...