vacuum without a beater bar and that the beater bar can be disengaged. How do I accomplish that? Thanks you can adjust the height on some vacumes like for bare floors and medium nap it will adjust how
Beater Bar Does not turn Hello, I have a Eureka Boss 5890-5909 series upright. It is the model that does not have the adjustable beater bar speed slide control on the handle. It is the model that the ...
...It sounds like your belt is broken, OR your beater bar is rotating but has not been adjusted downward to reach the carpet pile. Check by running the vacuum and looking to see if the beater is
Vacuum, More than likely there is an issue with your vacuums belt. It may be loose, which is causing the beater bar to not turn. Check to see if there's a good bit of tension around the beater bar. On
...vacuum model number BRLD.1 turns on and has suction but the motor does not turn the belt to turn the beater bar. Take it to your Riccar dealer to determine what is wrong. It may just need cleaned or ...
...beater bar back in the vacuum improperly, the belt would be tighter, rather than looser. If you are sure that the motor isn't loose and the beater bar was reinstalled correctly, then either tha belt ...
beater bar area My machine is a couple years old, the motor on the beater bar is now making a lot of noise. I have a dyson 17 animal and have a loud noise comming from the beater bar area.Also I don't
...beater bar and the side of the vacuum head preventing it from moving freely. To clean it out I fashioned a hook tool by straightening a paper clip and bending the tip at 90*, then took a flat ...
Beater bar stalls Regardless of what height setting I use, the beater bar stalls on carpet. I checked the height adjustment mechanism and it is working. Sounds like the belt to the bar isnt turning ...
243 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
146 Questions