...hEat will not **** up water from carpet check the vac motor hose could be clogged? does the vacuum motor turn on? check the vac motor on switch for power using an ohms meter.could have a bad vacuum ...
...heat up and even melt slightly. Then when you go to vacuum again the belt will vibrate causing more damage... This is why bag vacuums are better. Better yet, get a Rainbow D4 and ALWAYS ALWAYS ALWAYS ...
steam won't build up and main generator switch doesn't light up. however,accessory switch light is on sounds like the heating element has burnt out
Question about Electrolux Vacuums
The unit keep cutting out its fully charged and when switched on it lasts ten seconds and then switches off. small motor burnt out or over heating so it stops
No Steam after heating up Machine changes from heating to steam ready but no steam is coming out. Sounds like the switch on the handle or the steam release solenoid on the steam chamber is faulty ,use
...near the brush roller area.You may need a new power switch that often fail after the machines over heat or refer to this DIY vacuum cleaner guide.take it into a eureka vacuum service
turns off after 10 minutes of normal useage then comes back on 20 minutes later it has a cutoff switch two stop it from over heating check it isent blocked up sumwhere in the fillters or the pipes ...
Heat Surge Reset Switch switch keeps tripping. If The reset switch is tripping on a Heat Surge heater you need to take it to a qualified Heat Surge repair facility.
...vacuum has a thermo heat switch that will shut off the power as a safety feature the motor is over heating and the switch is being tripped, take it to your local shop and have it checked its either a ...
...heat switch. I beleive just needs reset. The switch, the way that it feels gives me this indication. Switch will not engage and stay switched to on position. J.J. Hi, Here is a tip that will give you ...
1,019 questions posted
Usually answered in minutes!
388 Questions
262 Questions
179 Questions
146 Questions