Hoover SteamVac F5914-900 SpinScrub Upright Vacuum "spring valve replacement" Questions

Ad

Question about Hoover Vacuums

1 Answer

...BROKE BUT DONT KNOW WHAT! The valve at the bottom of the tank has a valve stem and spring, you may have to replace the spring maybe. Go to http://vacuumsuperstore.com/F5880.html for a

Ad

spring valve,valve seal, valve stem Hello! The valve assembly is not replaceable on the F6210. We recommend replacing the solution tank part number 90001091, can be purchased online or through a local

Ad

Question about Vacuums

1 Answer

spring loaded valve on the soap dispenser needs replacing -is this possible or do I have to get the entire tank. Thanks Hoover Steam Vac V2, Model #F7430-900 I have a Hoover Steam Vac V2, model #F7430

...diverter valve model 472a took the suction diverter off and the spring, knob and red, I think, the red valve... can't figure out how to put them back on correctly. Images for vacuum diverter ...

Question about Dyson Vacuums

1 Answer

...valve (Attached to the right hand detachable filter housing and activated via an internal spring) is popping when the vacuum is on causing a major lack of suction. Is there an issue with the motor, ...

Question about Hoover Vacuums

1 Answer

...spring in the trigger. The valve was is two pieces and we glued it together and it still won't retract. Is it possible there was a spring in the trigger that got lost or do I need a new valve? ...

Question about Vacuums

1 Answer

the trigger. Best to replace it, usually it comes with a new seal, hard insert, spring and valve. Check under neath the seal to make sure that the tank is ok, if a hole or crack, then replace the tank

replaced. There should be a plastic stem in it, with a rubber seal washer, and a coil spring to close the valve stem when removed from the cleaner. If these parts are not there, or stuck, it will leak

...spring attached to the underside of the switch button is fatigued, you need the button and switch mechanism, same location but above the rocker. Also post the issue. If the lights are on and the vac ...

Question about COMP Cams Vacuums

1 Answer

there any thing else I need to know.? Turn crank so both valves are closed. Then apply air to the cylinder thru the spark plug hole so the valve won't drop onto the piston when you take the spring off

Not finding what you are looking for?
Hoover SteamVac F5914-900 SpinScrub Upright Vacuum Logo

1,019 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...