...find a genuine hoover replacement part by following the link below. Hoover SteamVac Replacement Turbine Brush Gear Part # 91001097 F7425 Parts Link ...
...Turbine Brush Gear Part # 91001097 F7425 Parts Link http://www.usavacuum.com/Hoover-Steamvac-s/109.htm Make sure the ends of the brushes are not bound up with hair, lint and string, and that the belt ...
...replace the Turbine Gear for $32. Follow the link below. Hoover SteamVac Replacement Turbine Brush Gear Part # 91001097 replaces part numbers 43191006 and 43191018 Hoover F74XX Parts Link ...
turbine and spray it with WD40 and spin it to get it going as it gets rusted and jams. I prefer to replace it rather than a quick fix. The motor must be replaced as well and will cost you probably 100
...Most of the problems with these models are in the turbine, it just needs to be serviced, some replaced. You can check the filter under the bottom (a red or white pull tab). Also check the lid
...f7425-900 steamvac v2 Purchased and installed new brushed as the cog spindle was broken off. However still does not turn brushes. Appears cob spindle is not being turned by female connector in main ...
...that gets rusty because of the water that is running through it. The turbine gear will have to be replaced. You can access the turbine gear by removing the hood. You can find a genuine hoover ...
...F7425-900 Brushes will not rotate. They seem restricted because they only be rotated by hand 1/3 of a turn. either way Take out the brush block, make sure that the shaft is ok, it goes up into the ...
how do i fix the bottom bearing in my hoover spin scrub f7425-900 ? It can't be fixed. It is a steel bushing that gets rusty and will need to replace the turbine
brushes won't turn The turbine gear assembly has to be replaced. This is the part: http://www.amazon.com/Hoover-Turbine-Assembly-F7425-900-91001019/dp/B005M4P3ZG
1,019 questions posted
Usually answered in minutes!
388 Questions
262 Questions
179 Questions
146 Questions