...tank. 2. Clear the filter screen of any dirt or debris. 3. Turn the cleaner on, check your motor suction by the filter screen. 4.. Replace the dirty water tank making sure it is flush to the cleaner ...
2 minutes before having to empty the recovery tank. Ideas to resolve ? Your cleaner should have a foam sock around the float cage in the recovery tank. Remove the foam sock and rinse it out with clean
...tank. 2. Recline the handle and let the cleaner lay flat. 3. Remove the dirty water tank lid. 4. Reposition the front panel located on the outside of the tank in the center. It should be flush to the ...
...tank out by the handle. 2. To remove the dirty water tank, slide the latches open located on the sides of the cleaner that hold the tank to the base of the cleaner. Grasp the handle and pull up and ...
Question about Bissell Vacuums
...2 in 1 tank? where does the water clean water go. I found the tank for the cleaning solution on the back but can't seem to find out where the clean water goes. Please help> There should be a line for ...
...tank. 2. Recline the handle and let the cleaner lay down flat. 3. Remove the dirty water tank lid. 4. Adjust the front panel located on the outside of the tank in the center so that it is flush and ...
...2 of cleaner tank. When I went to empty the catch tank, it was dry. What could be wrong? I thought I went slow. Which you had posted your model number, If you have a foam filter on the inside of tyhe ...
...2 Empty the dirty water tank if there is little or no suction. Turn off the Dirt Devil and grab the top of the dirty water tank. Push on the latch to release the tank and pull the tank off the base. ...
...tank. 2. Recline the handle and let the cleaner lay flat. 3. Remove the dirty water tank lid. 4. Reposition the front panel located on the outside of the tank in the center. It should be flush to the ...
Question about Hoover Vacuums
tank (2) Is the round rubber gasket installed on the tubular post under the hood, where the tank seals to the base? The tube extending down from the tank must sit on the rubber seal to get vacuum from
1,019 questions posted
Usually answered in minutes!
388 Questions
262 Questions
179 Questions
146 Questions