vacums I was vacuming using my vacum and caught little piece of tassle of a blanke shut of my vacum pulled it out (it hardley went in and now the power head wont work . The vacum turns on I have ...
...turn when vacume is on and I try to vacume I have cleaned the entire vacume. I do not know why the bristle brush is not turning. Alot of those vaccums have a little drive belt on them. You might look ...
turn on, the power light does not even come on. It seems like its not even receiving electricity. My old vacume had the same problem - the wire had a 'plug' on both ends. 1 to the wall outlet and 1 to
my kenmore progressive vacum will not turn on when I press the on switch, my vacum will not turn on. You need a new switch. Does the motor in the head turn on? If the one in the head turns on but not ...
Question about Dyson Vacuums
When I hit the power switch it turns on, but it will not stay on. When I hit the power switch the vacume sounds like it normally does. However, once my finger leaves the power switch the vacume turns ...
...vacume on it's side and turn it on and if the roller/sweeper is turning then the belt is good -- but if it is not turning then the belt is broke and needs to be replaced. also at the same time as you ...
Question about Bissell Vacuums
hand held vacum suction stopped after 1st use. Was working fine, suction does work if onfloor but won't once turned to tool hand held vacum suction stopped after 1st use. Was working fine, suction
vacume will not turn off I have to unplug power cord from the wall to kill the vacume. can anyone help? I also have the same problem. this must be a latent defect. any recall notices from the company?
...belt could be broken is some there is a swith that when you lower the handle will turn on the brushes. or if the vacume is on the barefloor setting in somecases they also wont spin i hope this
...turn manually. hey, how are you ? here are a ew things that could be causing you sorrow 1.) Check your vacume to ensure that it isnt clogged anywhere 2.) before your compressor and after the filer, ...
577 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
146 Questions