...repair the on off switch on a Hoover Wind tunnel? Hello! We recommend taking your vacuum into an authorized service center to have your on/off switch repaired or replaced. Follow the link to locate ...
...I unplug it. its the power switch, hoover has had that problem for years. I'd take it to a vac repair shop, sometimes the wires that connect to the switch get burnt as well and should be
Wind Tunnel Off-0n Switch Can't get the handle off, but my vaccum doesn't have a rocker switch anyway, it slides up and down. Anyone know how to release the handle from the self-propell cable and what
and have your model and serial number ready, they will tell you if you need repair from this recall. But if it is only 2 or 3 years old, then it isn't for your model. Otherwise just replace the switch
...switch on my Hoover 7500 wind tunnel is intermittent. How can I repair it? Hi You'll need to check if belt is disconnected or worn out. To check, disconnect cleaner from electrical outlet and ...
...repair? I'm fine without it, but thought I'd ask as well. Thanks so much! Krista [email protected] I'd try changing both the belts. If the flat belt is stretched it will affect both ...
...switch. If you are fully depressing the handle release pedal and it's not releasing, you should take it to the store where you purchased it, if it was a vacuum store. If you bought it at a big box ...
...switch then it would be the motor. Does it smell bad like a burning smell? If so it is definitely the motor and then @ that point you may want to get an estimate for motor replacement, and keep in ...
...switch and your in buiesness. ( check for a clog before repair ) There actually IS a fuse/buss of sorts, if you really stretch the definition, anyways...so if your switch checked out good, and your ...
577 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
146 Questions