Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum "2 brush wont" Questions

Ad

Question about Dirt Devil Vacuums

2 Answers

Why

...brush roll. 2. Make sure the brush roll setting is turned on. The brush roll on/off switch is located on the handle of the hose. 3. Reset the brushes. The brush roll reset button is located on the ...

Ad

Question about Hoover Vacuums

1 Answer

...2) Remove the brush assembly by pulling/unlatching it from base on each side. (3) Does one of the brushes have the drive pin present? It should be about ¼ inch square, and two inches long. It ...

Ad

2 months old Has suction through the hose but brushes have stopped turning and wont pick up You have broken the rubber belt that drives the brush. Flip over and remove the old belt and replace it with

...Vaccum is only 1 1/2 years old. We had same problem,Had to have bearings replaced at hoover store/service center. If you bought it within the last year it is under warranty and you wont be

Question about Dyson Vacuums

1 Answer

...2. There is material wound around the brush to the point that it is jammed. 3. The brush roller bearings are full of dust and rubbish so they have siezed up. 4. One of your belts has snapped (there ...

Question about Hoover Vacuums

1 Answer

...brush block to where it won't pull out any farther. There are 4 clips, 2 on top, and 2 on the rear of the brushes. (See picture, I have circled one of the clips in red). Simply press these clips at ...

Question about Hoover Vacuums

2 Answers

2 screws under the brush rack also, plus the other 2 longer screws underneath the unit, then the 2 under top cover) After removing the unit the 2nd time it quit I took the turbine apart and lubricated

...2:11 https://www.youtube.com/watch?v=Jj_43IHz9U4 Dec 28, 2012 - Uploaded by eVacuumBags How to Replace the Belt & Brushroll on Bissell ProHeat 2X Series Carpet ... How to Replace Bissell Deep ...

2) On most machines, the brush rotates and has two "bearings", one on each end. If one or both become clogged with hair or dirt or whatever, the bush can "bind up" and will no longer rotate until this

Question about Electrolux Vacuums

1 Answer

brush on ours wont spin Take out the brush roller. (turn the plastic lock mechanism with a coin or screwdriver, pull out the plastic holder, and the brush will pop out). The brush roller has two white

Not finding what you are looking for?
Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum Logo

577 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...