Question about Eureka Vacuums
...suction weak on bare floor, hose only works when dial is turn to floor? The brushroll and carpet setting is working fine. but for some reason my barefloor suction is weak. Also the hose only works ...
...suction. When I change to bare floor option on the handle the brush stops turning (correct) but I still have no suction. The lights on the handle showing --floor,carpet, high and low all work. sounds ...
bare floors. It just spits out everything it picks up. The wand works fine, seems to have suction. I have used this vac a handful of times. VERY disappointed. Any thoughts? Please help! does it have a
blinks and the roller brushes stop working This is normal. The roller brushes aren't needes on bare floors. They are used to brush lint, hair, etc. from the carpet that the suction itself wouldn't get
...suction on bare floors and carpets with medium pile with padding underneath. When going from a bare floor to a low pile area rug, all of that suction locks the vacuum to the bare floor underneath the ...
...suction that you can barely move it across the bare floor. I cleaned the base filter and the dust chamber is kept clean. It picks up everything still and is fine on carpet but not sure what's causing ...
Question about Electrolux Vacuums
bare floor setting is suction only - so the floor is not scratched. The vacuum has a reset button for if it overheats. The manual is helpful. The customer service number is helpful. Other answers here
suction at all - the power setting specific for bare floors (tile/hardwood) picks up some. When I detach the roller brush and use other attachments, the suction is just fine. It is much harder to push
...bare floor" selection on my Eureka Boss Upright, the beater brush still rotates. any help? Your switch should have 2 different on positions. One for simple suction and one to engage the beater. The ...
Question about Dyson Vacuums
...Bare Floor setting the head moves into position but does not spin. The suction is still strong through the handle. The clutch is moving up and down into positions. The brush roll is not supposed to ...
66 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions