Question about Dyson Vacuums
...brush button won't engage brushes Dyson dc25 off button won't turn off, brush button won't engage brushes Hi ... did u get this fixed cos mine is the same hve to switch off on the ...
...brush won't rotate The cordless Shark 15.6v works and picks up dirt but the motorized brush won't turn. I have removed all lint but can't find a tool to take out the screws (not normal ...
...won't turn it is due to a bad turbine. Insert a screwdriver into the square hole that the pin on the brush fits into, and see if it turns. If it is seized up, the turbine assembly will need to be ...
...won"t turn (1) Remove the brush block and assure the presence of the square drive pin on top of one brush. It should be about 1/4 inch square, two inches long to connect o the drive mechanism. (2) ...
why won't my brushes turn why won't my brushes turn most likely stripped gears on the end of the brushes. (beltless model?)
Dyson DC41 brush won't spin Brush won't spin You need to check the belt hooked to the side of the brush (sometimes hidden by plastic)
won,t turn,belts were checked,power on ,vaccum tilted,brushes turn with no problem by hand? If belts are ok then possibly needs new front brush motor replaced. remove the lift off and assure the plugs
...brush bar won't stop turning when handle is put in upright postion Hi Janet. Thank you for asking this question. Your vacuum wasn't designed with a brush on/off switch so having the brush ...
brush won't turn on my Panasonic MC-CB467 brush won't turn on my Panasonic MC-CB467 There should be a safety reset button. So like if you suck up a rug it will shut the power to the brush ...
Brush won't turn There is a good chance the belt is broken. The reason belts break is because the brush seizes up due to hair wrapping around tight at the ends of brush. Inspect closely with a ...
188 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions