Hoover F7220900 SteamVac V2 Upright Vacuum "back brush put" Questions

...back the old brush roll you can switch to the old position. After a year or two you can switch the new brush roll to the old position.) Put the bels back on the motor shaft and then stretch and start ...

...brush roller is back in it's origial spot on the base of the vacuum. Turn the brush roller 3 compleat turns backwards, then do the same forward to seat the belt. Put back on the base plate and put ...

...back correctly but the brush bars won't turn. Now what? Any suggesti shoestring got caught in brush bars on my hoover windtunnel V2. I took it apart to remove the string. I have put everything ...

...and stretch the belt till the brush roller fits back into the base. Turn the brush roller 3 compleat turns backwards and 3 forward to seat the belt in the proper position. Then put back on the

...moved out just a bit, putting too much force on the delicate motor. Simply push the caps back firmly into place. Make sure the brush and the surrounding area is clean, put back in and It should spin

...back on the ribbed belt Brush won't spin. Put it back on the ribbed belt what's wrong? Make sure the driving motor (power on) is turning (without the belt attached). Make sure the brush turns freely ...

...of the brush that the belt connects to.. Put new belt on.. Put the brush back in place.. It might be a bit tough because the new belt will have a bit of tention.. Put plate cover back on and

...brush back in a position where it can even spin. The white end of the brush has a circle slot that slides right in, but the black end is like a rectangle and I don't understand how this can possibly ...

brush back in(this might be a little hard scene u have the new belt on)and be sure that ends of the roller brush sets all the way down on the sides,then put back the plate start from the front putting

...the brush then reinstall brush and put the belt around the metal rod thats inline with the groove on the rotary brush...put cover back on and put the 2 screews back in...thanks and have a great ...