...vacuum does not pick up anything Check the belt and then the tube on the side of the vacuum that runs from the bottom to up the side to the bag. If they belt is broken the vacuum will not pick ...
Question about Vacuums
...vacuum is not picking up anything, no suction. have eureka model 9434 replaced belt put bsck together, brush rotates, but vacuum is not picking up anything. It sounds like the machine is clogged. ...
...6390 Vacuum This Bissell 6390 picks good through the hose but on carpet does not seem to pick up anything. Any suggestion to make it pick up. Brush roll is not moving. Replace the belt to the ...
...back it picks up particles and only on carpeting, doesn't pick up anything on hardwood floors check the container lock and lid to make sure that they are installed properly. filter could be
changed the filter/brushes. Is there anything else I need to do Its sounds like the brushes aren't turning. Pull the vacuum and bin off the back and start it and look to see if the brushes are turning
Isn't picking up anything. it runs and the brushes run, but it's not picking up anything its loosing suction. most likely a clog
...carpet my bissell powerforce vacume is not picking anything up off the carpet. i have changed the bag already. You need to replace the belt. You can get replacement belts here: Replacement Vacuum ...
Not sucing It is not picking up anything from the floor, and nothing is going into the bin. The reason it is not picking up is probably because the belt is stretched, worn or broken and is not turning
...vacuum barely picks up anything. TRY THIS STEP BY STEP NOZZLE REINSTALLMENT GUIDE... http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039 HOPE THIS ...
...vacuum does not pick up anything Have you cleaned the washable filter. Perhaps your cyclones are clogged. you can clean the cyclones yourself. check out this video ...
194 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions