Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum "switch floor mode" Questions

...floor mode, when I press the button to change to carpet it turns itself back to floor mode Switches itself from carpet mode to floor mode constantly make it impossible for it to turn back into flor ...

switch cleaning mode from tool to floor I have a Hoover SteamVac Delux, model number F5869-900. i cannot switch the cleaning mode from tools to floor. don't have a manual and from what i have searched

...switch now from floor mode to hose mode. I take out the hose and I can see the white part. I thought it should move as you go from upright to recline position of the handle. The changeover valve is ...

...floor surface switch on hard floors even on carpet. What happened? It's an issue that the front roller isn't engaged. there's usually a belt connected to the roller on one side of it. That belt is ...

...switch from floor to carpet mode? Roller is not stuck or full of lint. Bagless is clean. My floor mode works but when I attempt to switch it to carpet, it remains in floor mode. The roller is clean ...

...but to no avail. Any more ideas, anyone? If no response when you put the switch on in the 'floor mode' check the switch. It might be partially malfunctioning. Check for kinks or holes in the

...switch? There is obviously a way, but i wouldn't recommend it. Take it to a vacuum repair shop and let a professional do this. It's not a DIY job I have the exact opposite problem. It wont stay on ...

...switch from floor mode, to being able to use the hose? Is there a button or a dial or something? That unit is supposed to automatically do it when you lock it into the upright position. When you do ...

...switch to control btn bare floor / carpet mode doesn't seem holding in it's position when I set to the bare floor mode... it keeps coming back to carpet mode with brush-bar activated... the ...

switch the appliance 'ON' - recline the appliance - press the brush bar 'ON/OFF' button - the brush bar will stop spinning. • The brush bar will automatically stop if it becomes obstructed. See 'Brush