Hoover Floormate H3000 Upright Wet/Dry Vacuum "lower brushes" Questions

I fitted a new belt. Green light is on so brush is spinning. As I lower the head the brush slows to a stop as it contacts carpet. Its a g5. Ami using the wrong belt? There are much quality differences

...Brushes are switched on by lowering the handle which activates a micro-switch located inside the lower part of the machine. Vacuum must be running as well. The DC power for the brush motor comes from ...

with brush on, you lower the handle and bursh turns off if you lower the handle on the ball dc15 model with the brush bar activated the brush stops working but if you raise the handle the brush starts

Lowering Brushes How are the brushes lowered? in the front where the watwer sucks up there is a hairball how do I get the front plastic cover off

...more than a year old, turn both bearing blocks to the side with only one notch showing. That will lower your brush closer to the floor and let it pull against the carpet. If you have it in the

...brushes to touch carpet. Have I attached something incorrectly? Salesperson demonstrated shampooer when he sold us unit & it worked then. Looking forward to your response and thanks in advance for ...

lower vacuum brushes don.t turn. The upper Pet hair Turbo works. The sweeper on the lower part of cleaner does not turn or suction what do I do? Hi! It sounds like you have a broken or stretched belt.

...this correct? you adjust it to adapt to the wear of your brush. they will make your brush higher or lower since the hole is offset. if you were to install a new brush you would want it as far away ...

I have a Eureka Altima and not sure how to change the belt? 1) Use handle release to lower handle flat onto floor 2) Remove 2 screws from the front side of brush roll cover 3) Lift and remove brush ...

I can't get the brush to work or suction or any air flow in the lower part of the vacuum. The brush got tangled with thread, so I disconnected the lower part it is in, took out the thread, and put it ...