Seagate Barracuda 7200.7 ST380011A 80 GB Hard Drive "slave setting" Questions

setting of jumpper to make it either as a master or slave During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to

jumper settings for slave Page 21 in this manual shows the jumper should be removed to set this drive as a slave. You could also position it over the second column of pins, that is the cable select ...

...slave setting for this hdd.... Hold the drive with its metallic cover on top and the connectors towards you. On the cover you will find the jumper settings given for all types of settings. there you ...

SATA HDD make SLAVE How can i make may another SATA Harddisk as a SLAVE? i dont see any jumper settings in may Barracuda 7200 harddisk to change to become a slave. IDE Cable with 3 connectors (you ...

how to set master, slave settings in sata hdd i got 2 hdd and i want one as master and other as slave . so , plse tell is there any need to change the bios settings or any other adjustments. for this.

trying to make my seagate barracuda 7200.9 slave 1) Open your computer case 2) On the back of the drive where the connectors are, you have jumpers. These small plastic tabs change the function of your

How to make sata hard disk a slave??? I have a seagate 80gb sata hard disk amd i want to male it slave. how can i do this? Look at the jumper settings. These jumpers are located near the data cable ...

Barracuda 7200.10 (how to make it slave) The map isn't on this model of hard drive. I need to slave it out but there is no mapping on the hard drive like you would normally find. Seeing as different ...

need to know where to set slave pin The pin settings are nest to the power connector. If the location is not shown on the label then it will be marked on the circuit board. MA = Master SL = Slave CS =

How do to install slave drive Seagate Barracuda 7200.9. Does it has to be to the motherboard or to a card in my computer? How do I set the pins in what order? if y0our going to slave one hardrive you ...