...IDE and moved the DVD to the middle connector. As memory serves me top is Secondary and primary is middle. I removed the jumper from the ATA hard drive but DVD still has this in. I do not fully know ...
...IDE drives. Most drives have adequate markings on them to identify these jumper positions. If not marked clearly, you will need the manufacturer's data to determine that designation. If you are ...
...jumper is ' located at the rear of the hard drive next to the IDE/SATA lead/s hope this helps   Do not use "slave" -- use "master", because it's the only disk connected to the ...
Question about Seagate BARRACUDA Computers & Internet
...jumper is on the 1/2 slot ( which is the ''limit drive capacity slot'') or the 3/4 slot (which is i don't know really) it works if I do that BUT all that reflects on the BIOS is that it is read as an ...
Question about Seagate BARRACUDA Computers & Internet
...IDE, yes tried all combination on the jumpers, changed cables etc. etc. I have been into this since 8088 20mg. (All drives runs fine as slave in other comp, dif. boards though)!! Very seldom have I ...
...IDE , set jumper as master , it reads alright as IDXE master and it show my SATA hard drive ...try to install OS on to it .... it gets to " computer is inspecting your system " .............and back ...
...IDE drives. Most drives have adequate markings on them to identify these jumper positions. If not marked clearly, you will need the manufacturer's data to determine that designation. If you are ...
...IDE drives. Most drives have adequate markings on them to identify these jumper positions. If not marked clearly, you will need the manufacturer's data to determine that designation. If you are ...
...up on my computer if its a IDe HDD check the Jumper setting, there cannot be two master or slave on the same ide cable. try attaching one one drive per IDe cable to see if your HDD is working or ...
jumper from top of #2 to top of #3, had been working as backup to c: drive, I want to make it as master. Where can I find a pictiure of settings, there are no markings on the front or back of case? bb
190 questions posted
Usually answered in minutes!
116 Questions
74 Questions
22 Questions
19 Questions
20 Questions