Keurig Special Edition B60 Coffee Maker "brews back water tank" Questions

...water is not pumping back into the tank during the brew cycle - this indicates a clog (or partial clog) in the water line to the brew head (most likely place is at the water output shaft in the brew ...

water will spill out the back. But some may overflow into the basket area then the warmer plate. * Follow the MFR brewing instructions for filling. * All brewers should stop water drips after brewing.

water tank into the back of the machine. Press down firmly on the water tank to ensure it is in the correct place. 4 Remove the cup stand from under the drink dispenser. Place a container able to hold

...water from the back at the bottom every time I pour water in. It leaks about 1/2 cup or more. Is there a seal or gasket I can replace to remedy this? VPR has a semi-sealed tank that keeps +1 pot of ...

...back on it will again immediately indicate that water has already been added to the heating tank and you are ready to press brew (blue flashing light around 'brew' button). I think something is wrong ...

back to square one) - and my office colleagues seem to have put the manual in a REALLY safe place! Help... the blinking blue lights, means the water level is low...BUT sometimes it sticks, if the tank

...back on it will fill itself and heat the water and let me brew another cup. Note: This is a replacement brewer because The one I received for Christmas did the same thing. I now have 2 of these with ...

back and forth horizontally so the water in the tank splashes around and frees anything which may be built up in the tank. Some water may splash out of the brew spout hose. 14) Tip the unit as in step

...Water is also filling back catch tray and leaking from under central unit. it's possible, like mine with the same problem, that one or more of the plastic feet under the water tank has broken, then ...

water line. If this is the case then the tank must be pre-filled and heater turned on. (a switch in the back) Installation is usually done by the vendor or service tech. It should have been tested and