Keurig Elite B40 Coffee Maker "blow straw" Questions

...the left tube at top of reservoir. Tried descaling. Tried cleaning needles with paper clip. tried blowing very hard through tubes at top of reservoir with a straw inserted in them. Even heard ...

happens from time-to-time. My hubby fixes it by putting a drinking straw over the blocked spout and blowing the clog out. It works and there is no need to dissemble

...straw and place it at that drain and blow hard. You should hear air flow through the unit and out the drip tank. You need a far amount of seal at the bottom for this to work, I built a ridged tube ...

.. Keurig will tell you to check for blockage at the upper needle with a paperclip... someone tried blowing into it with a straw to free the obstruction... which Keurig assumes is coffee/Tea grounds..

...straw, blow air through and try to **** through the water port at the bottom of Keurig. Plug the water tank again in and start the system. It will take some time to prime, keep trying. There is ...

...ensure it is seated properly if your problem persists. Hope that helps! Best of luck... You could also try a using a straw to blow thru the whole where the reservoir attaches. I fixed my B40 this

...straw to blow thru the whole where the reservoir attaches. I had this problem after taking the brand new appliance right out of the box. It sounded like it was trying to fill the heating chamber with ...

...a straw over the needle that punctures the cup and blow really hard, then suck really hard and it pulled the debris right out! Then do a cleaning cycle (water&vinegar) to clean out any

...it should start drawing water and brew as designed. Hope that helps! Best of luck... Try using a straw. Use it to blow thru the whole at the base where the reservoir sits. I fixed mine this

...out a new one. They will work with you until you are happy. They sent me a new one and 4 free boxes of coffee. I fixed mine using a straw to blow thru the whole at the base where the reservoir