Keurig B60 Coffee Maker "water injector" Questions

...with clear water, the drain plug under the injector is clogged. Clean it with a toothpick or shoot some water through it with a syringe. This comes from sweet coffee beans (Mexican, Vietnameese,

...water that comes from the injector when the brew group disinguages it. make sure the path is clear of coffee grounds in such. Some other things to check are the conditions of thr o-rings there are to ...

...water flow meter that is stuck, or stuck injector needle. It may not be able to count the water flow. You have to open the machine up and pull the meter apart and clean it. Most of the flow ...

water under the machine or drip tray indicate that the drain behind the brew unit is plugged. Remove the brew unit. You will see the injector in the back of the machine. Below the injector is a pocket

water under the machine or drip tray indicate that the drain behind the brew unit is plugged. Remove the brew unit. You will see the injector in the back of the machine. Below the injector is a pocket

...I took a syringe for a meat injector and built a gasket so it would seal over the water intake. Then I forced several syringes of water into the pump till it finally picked up and caught its

...injector is clogged. Clean it with a toothpick or shoot water thru it with a syringe. It is a trapezoid shaped small hole that lets water from bypass go into drip tray. If clogged, the water goes on ...

...injector and expels the water direct to the drip tray. As you can understand the above valve is working when the pump pressure exceed a pressure of 10-11 bars in order to keep the espresso quality ...