Keurig B60 Coffee Maker "2 lcd working" Questions

...lcd screen dose not work proply. some leters do not show up making it verry hard 2 read Assuming that the integrated circuit that provides the signals for the display is not defective (those circuits ...

...LCD display just flickers lights it no longer displays words More than likely only a new display will fix it, it is that whole front silver panel with the buttons and display plus a big part of the ...

...2. Press "menu" once. Your LCD screen should say Brew 0:00. 3. (I messed this step up like 10 times and had to unplug the machine, then replug it and start over at step one. You have to unplug if the ...

...2. Press "menu" once. Your LCD screen should say Brew 0:00. 3. (I messed this step up like 10 times and had to unplug the machine, then replug it and start over at step one. You have to unplug if the ...

...2 screws above the LCD and the 1 screw on the opposite side. These secure the back cover to the unit. 5) Remove the bottom metal cover (you do not need to unscrew the rubber feet). 6) Remove the ...

...LCD can be found here. I should have taken a picture of the exact spot I put the resistor, but I didn't and it's back together now (ready for the next 6,000 coffees!) But once you look on the back of ...

...LCD screen turnedblack and the glue melted and spread out. Luckily upon cooling thescreen returned to its normal color, the glue hardened, andeverything turned out fine. I would recommend a longer 15 ...

2 water (take out your charcoal filter first, if you're using one!), and run it through like a normal brew cycle, run clear water afterward. They have a 3 yr limited warranty on them, so if you've had

2) of these & they have both been replaced. They just replaced mine as well. I should be receiving my replacement machine in 3-7 days, and all I need to return is the k-cup holder from the machine

...2. Press "menu" once. Your LCD screen should say Brew 0:00. 3. (I messed this step up like 10 times and had to unplug the machine, then replug it and start over at step one. You have to unplug if the ...