Starbucks Saeco Italia Digital Barista Coffee Machine "remove grind adjustment knob" Questions

grind, stuck all in that flap help????? Follow these instructions to put grinder back together... Items needed to clean grinder 1- #2 Phillips head screw driver 1 Cleaning brush Prep: Remove all beans

...remove the 2-3 screws in the chamber, then lift hopper slightly and turn adjustment knob towards the middle number, or halfway between fine and coarse. Then lower hopper make sure the gears line up ...

...grind if it is not fine enough, then remove screws in bean hopper and lift slowly until you can turn the knob without it touching the gears and move it towards coarse say #12 or so, then lower hopper ...

...then turn to lowest-finest number, then remove screws on grinder lift chamber and turn knob to coarsest setting and reassemble and try machine, remember to adjust grind when machine is

...adjustment knob, remove the beans container, remove all the screws holding the top cover on. On the models I'm familiar with there are 2 in the front and one at the back down a deep hole under the ...

...in the grinder chamber, then remove the screws and slowly lift the chamber about 1 inch high, then turn adjustment knob 3 numbers back and lower chamber making sure the gears on the bottom line

...remove the silicon plug (part number 90 in parts diagram) in the center of the grind adjustment knob by poking an unbent paperclip with a small hook along the silicon plug's edge, twisting 90 ...

...Remove the grind adjustment knob and the one screw holding the bean holder in place. You should now have access to the grinder and clean it with a brush. Further disassembly as outlined above may be ...

...remove the old coffee residue on that part clean it good with a tooth brusch or somrthing like that". Is that the metal piece that I am feeling? Thanks, Hi, I think so, most problem with that the ...