Sony Vaio Vgn-c290 13.3" Lcd Wxga Laptop Screen "computer power connection" Questions

...to the PSU.  If that is good, then power on the PSU and check voltages at each of the connection.  If you are getting power to the connections then you have a faulty

...POWER and the DATA cables between the motherboard and the HDD (Hard Disk Drive). Remove them, and then re-insert them. Try connecting the DATA cable to an alternate connector on the motherboard. ...

No power to dell poweredge 1600sc. Redundant power supplies have no lights. Either the power supplies have both failed, which is unlikely, or they are not connected to a hot outlet. Frequently servers

...that keeps your server from being fried if a sudden power surge goes through and it act as a back-up power source if you lose power. Try this new connection sequence and see if you have better

...Power On Self Test. Since the computer system was moved it is possible that a component is not making proper contact. Start by removing the side panel of the computer chassis, you will then need to ...

Can not connect to server. My status led is flashing red. After removing top and blowing dust from unit I could power it up but could not connect to it. The status led is flashing red. Reinsert RAM ...

...near bios battary in which two pins are connected with one jumper & one is free, sort one pin with that free jumper & power on computer after some time power off & set jumper as

...showing a power LED Indicator , SMPS Fan's working but Server FAN also Not Working . check all power connection its connected in mother board maybe loose connection remove and re fix it will ...

power cable. Turn the computer on. If you get a different "beep", the lack of RAM is the problem. If you get the same "beep", the video-card is the problem. Turn the computer off. Disconnect the power

Connect HP Proliant ML350 Server. Hello I have both a HP Proliant ML350 Server for my house use. I am not a geek at this server thing, and this is my problem. On the back side of my Server I have 2 ...