Hotpoint 24 in. DWF34 Built-in Dishwasher "spray arm" Questions

...spray arm does not rotate or spray any water. Whats the exact model? check whether the supply is passed over to the motor.... and also the motor Hello There is a fault in the device - motor, theres ...

...spray arm inefficiency: Loading large or tall items in the lower basket which stops the arm revolving. Upper spray arm split along seam. Upper spray arm blocked. Under dosing of powder causing foam ...

...spray arm is movable. Inspect the spray holes in the top spray arm. If clogged, clean the openings. If no clog, position the spray arm in a certain position (e.g.: arms facing front and back). Then ...

...spray arm a spin to make sure it rotates. It should spin freely. If not, remove plastic spray arm clip, flip it over, replace it, and try again. Make sure holes in the spray arm are clear of debris. ...

...spray arm seal, but the arm still wont spin. I get water but not enough pressure to turn the top arm. The bottom arm works fine. Should the top arm turn easily when pushed by hand. It appears that it ...

Spray arms not working Dishwasher goes through full cycle, but its clear the spray arms aren't moving/spraying water during the cycle. Water comes in and drains correctly. I took out all the screens &

...spray arm. Take note of whether or not the arm moves freely or if its movement is restricted. It should not be restricted in its path of motion. Now gently pull up on an end of the spray arm. The ...

...spray arm, place the spray arms (all) in a specific position and activate the dishwasher for a few seconds with wash action. Then examine the position of the spray arms to determine if there was ...

spray arm not attached We removed the spray arm to clean out the filter - now cannot get the spray arm to go back on - has threads - will not work any direction ------------- You may have stripped the

...spray arm making clunking sound The lower spray arm making noise - a thunking or clunking sound. Removed and replaced the arm to make sure it was sitting correctly, it seems to be, but noise remains. ...