Galaxy Radios DX-33HML 40-Channels Base CB Radio "connex 4600" Questions

...turbo 3300 https://www.bellscb.com/products/tenmeter/connex/manuals/Connex_CX-3300HP_OM.pdf 4600 turbo http://www.manualslib.com/manual/966347/Connex-4600-Turbo.html 4300 hp and turbo Owners ...

connex 4600 turbo radio stays keyed up even with mic disconected Bad RX/TX Transistor? I don't have a diagram for the 4600. Sorry!

i have a connex 4600 turbo, drivers say they are hearing a slight squeal when im talking on it. i dont hear it through external speaker it is network connecting wires problem.

Connex 4600 turbo so can someone tell me where I can buy one or tell me where the mod limiter is on the board, and where the internal AM modulation control pot is. Thanks in advance check www.cbtricks

connex 4600 turbo the talk back some times when i talk on the cb the talk back gets loud and some times it gets soft can i fix this thanks THE TALK BACK VOLUME IS CONTROLLED BY THE MIC GAIN, TRY ...

...Connex 4600 Turbo have been trying to find a usable digital version of such a manual online without much luck so far ... a photo copy version would do too ... but low tech to say the least. Would be ...

...connex 4600 turbo that is driving me and the cb shop that I use nuts!!!! It will quit recieving or broadcasting for no apparent reason. The meter needle will fall to the left and absolute sil also ...

Will my connex 4600turbo hook up ok on the factory conection for the cb? The wire size is no12. This is a 190 watt radio it needs 8 guage wire and ran to battery source.

...Connex 4600 Turbo. What is the AM & FM mode for and can I receive the 40 CB channels? What band are they on? Doug i have a 4600 connex and if i turn the mic gain all the way up i get alot of ...

Connex 4600 dropping on recieve Sometimes is keyed up on power up. Receive drops after a few minutes on Modulation breaks up. cold solder joint somewhere