...propane appliance shop near you, you can probably just get the nipple that goes into the bottle. It's aboit 3/16" diameter, 3/4" long and may have a 6 sided end up inside the screw on cap of the ...
Question about Rinnai Heating & Cooling
...propane CO, who sent out a repairman to check for a leak. He promptly told us that when you set it to "economy", it NEVER shuts off! So much for "energy saving"! Anyway, he removed the side panel & ...
...3 minutes. All the components are clean. Thanks, Wes Reddy suggests: 1. Propane supply may be inadequate 2. High surrounding air temperature causing thermal limit device to shut down heater 3. ...
Question about Dyna-Glo Heating & Cooling
shuts off when switched to low and smells when running. Have a DYNA-GLO model RMC-50LPT propane wall mounted heater has a heat setting from 1 to 7 will run on high settings but when switching to ...
...propane forced air furnace is less than 5 years old. When I remove the upper cover I see a green light blinking 3 times which is some switch not closing which is a different option than the switch ...
...shuts down and recycles as if to refire again. Propane has been checked and changed and valves checked. clean fire is visible in the view port , but still shuts the valve down. It very well may be ...
...will not glow I just get a blue type flame from all 3 then after a short period of time the unit shuts down. It is a propane heater. HELP try the maintenance procedures on page 17. (click to
...3 seconds then shuts down if i turn off the power and restart it willl come back on and then shut off again? Any suggestions what might cause this? If you mean hot surface ignition and not spark then ...
Question about World Marketing Heating & Cooling
...you don't know exactly what your doing then you need to get a pro. Remember that your dealing with propane and it could ignite and cause serious damage to you and your home. Please be very careful ...
...3 seconds,and shuts down.normaly i,d say bad flame sensor,..cant see one in wiring diagram.theres only the 2 wires going into flame chamber.the 24 volt to ignition module stays hot when it shuts ...
473 questions posted
Usually answered in minutes!
282 Questions
85 Questions
73 Questions
62 Questions
44 Questions