Reddy Heater-170,000 BTU Kerosene Deluxe "wick replaced flames" Questions

Ad

adjust the wick on a dyno glo kerosene heater how do you adjust the wick There is a big knob on the front. Clockwise is more flame, counter clockwise is less flame. If the wick is too short to stay ...

Ad

...smoke and yellow flame I did the decarbon procedure but it still does it. Do I need to replace the wick? I'm wondering the same Should a duraheat, etc., cylindrical convetion heater's flame be

Ad

Question about Dyna-Glo Heating & Cooling

1 Answer

...replaced the wick and i can not get a full flame and i have it adjusted all the way to the top The wick needs to be cut like a tongue, or at least cut the corners off and try to make it round this ...

Question about Corona Heating & Cooling

1 Answer

...replaced the wick, I let it soak for atleast 48 hours, once the heater is burning i bumped into it and the auto shut off fliped off and it kept on burning but only flickering. The dial knob did not ...

Question about Dyna-Glo Heating & Cooling

1 Answer

...replaced the wick. We soaked it for an hour and then lite it. It burned good for about an hour then fizzled down to no flame and smelled really bad. We turned it off and soaked it over night but it ...

Question about Corona Heating & Cooling

1 Answer

flames starts going very low a little pass the 1/2 line on fuel gauze. what causing that. From your description, it sounds like the wick may need replacing or the tails of the wick are not hanging all

Question about Dyna-Glo Heating & Cooling

1 Answer

i have a dyna-glo rmc-95-c2 kerosene heater, i replaced the wick and i can not get a full flame when you replace the wick did you set the control all the way down

Question about Dyna-Glo Heating & Cooling

1 Answer

how to replace wick replace wick You have to disassemble both the guard and the top shell of the unit.  Then all you need to do is remove what's left of the old element and then put in the ...

Question about All-Pro Heating & Cooling

2 Answers

...level's getting low when it's right side up. After filling, let it sit for a while to allow the wick to saturate. Assuming your ignitor is no longer operational (that's what the two D cell ...

Question about Dyna-Glo Heating & Cooling

1 Answer

Dyna Glo model 95 C2 wick replacement is a boogar even with so called instructions is there any trick to this wick is hard to hold in place and insert over round housing without pulling out 3 sidepins

Not finding what you are looking for?
Reddy Heater-170,000 BTU Kerosene Deluxe Logo

389 questions posted

Ask a Question

Usually answered in minutes!

Top Reddy Heating & Cooling Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Paul Carew

Level 3 Expert

3808 Answers

vince

Level 3 Expert

2530 Answers

Are you a Reddy Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...