Reddy Heater-170,000 BTU Kerosene Deluxe "reset time" Questions

...reset, but rather time/date and temperature reprogramming). What gives? Is this an electrical problem? My furnace is quite old, so could that be the problem? It is very annoying. Maybe it is time for ...

...Rest key to reset the Timer. Notice that the "Change" reminder disappears from the thermostat screen. If more than one Timer expires at the same time, press the Reset key to reset all expired

hi, i have lifestyle lp522 timer for my central heating. i have reset it a number of times and then reset the clock. then i have set the timers to come on a certain times which work ok but then the ...

...time guard ETU2000 timer Hi there, Looking for some help with my TimeGuard ETU2000. I'm not getting any hot water whatsoever, tried boost, reset, resetting timed hot water all that but still no hot ...

...it back in. Then turn the Master ON/OFF switch to ON and set the heater as you normally would. That time out, should give the controls time to reset themselves. Hope this helps you solve the

...reset . ever time it comes on why It might be the reset is worn out or it's bi-metal is weak. But it most likely is because of air restrions. When the air cannot move freely in the heater it will ...

...time without use. I would suspect that either the reset (HA3003 Safety Control) or the photocell (HA3019) is bad. For test purposes only bypass them one at a time- see if the unit ron OK. ...

my reset button keeps tripping my bathroom heater has been vacuumed clean and works well but after a while, stops working, needing to push reset button. Reset button...Is it also a breaker? After they

...reset 1 more time it will then say p01 press the heating temp button until u see p02 press the hot water temp button until it changes to numberv2 and that will fix ur problem The answer from Ferroli ...

...reset the time and everything was fine, until this Sunday. I checked the thermostat in the evening (the weather had been warm, so I didn't notice the heat not coming on). Again, the clock claimed it ...