Reddy Heater-170,000 BTU Kerosene Deluxe "new wick burns" Questions

...water in the fuel. With new wick it has to be burn in. Set outside let it burn about 30 minutes that burn it off. If your wick too high it will smoke. check to make sure wick is installed

...new wick and new fuel. or build-up on the wick. check to see if the wick is hard. your wick should be soft. burning out the heater until all fuel is used either by running down all the fuel in the ...

new wick cleaned it up wait an hour lit it and it smokes any suggestions new wicks in kerosene heaters will smoke till the mfg coating burns off it , burn it outside for a few hours then readjust wick

...time. Is it time for a new wick? If yes, what wick number. The wick has been burned dry. Go to this site. You can find out just about anything you want to know about kerosene ...

wick,flushed out tanks and added new kero from diff source. If tillted aprox 25deg to left will work for 5-10 min then burns down again. Comfort Glow mod.# GR9B radiant/catalitic type htr. Don't think

...kerosene and become evenly distributed. Check the placement of the new wick and allow time (several hours) for the wick to absorb the kerosene. Dyna Glo RMC 95 C7 Kerosene Heater User Manual ...

...wick down into the wick lands and check for level. Trim as necessary to get a level top. Reassemble. If the wick IS pinned, then no adjustment is possible. Remove and discard and install a new

...new wick into my heater. I've dumped the entire contents of the old kero and replace with fresh. and still have the same problem. A friend gave me an old kero heater of a different brand and it works ...

new wick on my heater and have been burning it for about a week now. I am finding that with the wick adjustment open all the way that the flame height is no where near what it was before I changed the