Reddy Heater-170,000 BTU Kerosene Deluxe "mr spark flame" Questions

...mr heater where is thermo coupling If you look where the flame comes from, you will notice the spark probe and another probe. Both are in the flame path. Press in on the start button while the gas is ...

...Mr. heater torpedo heater that when you hit the start switch the flame just starts pulsating on and off. Its of course getting fuel and spark, fan is turning. I can watch the nozzle and see the flame ...

...spark it is the flame sensor, you can get one that will fit from Mr. Heater. the wires are different but they all work the same, just splice it to your old wires. there is no wrong way to hook it

spark ?? see if ignitor is clean , clean flame sensor check high limit on heater , jump out pressure switch see if this works or jump out limit , check you have gas to heater might sound silly but can

heater wont stay lite I flip the switch and it lights and works for 10-20 seconds and the flame goes out the fan stays on Can you give us a brand name and model number? Needs a service, make sure ...

the units motor runs but I dont see any spark or see any fuel spray so the unit is not lighting for me model is MH175KT Hi, Here is a tip about torpedo heater problems... also in this tip are the ...

...spark and it blows fuel then thats the answer. you can get one thet will fit from Mr. Heater for 3 bucks. the wires are different so just splice the to your old wire harness, there is no wrong way to ...

...Mr Heater MH75KT multi-fuel space heater, filled it with #2 diesel, and it will not burn. Igniter is throwing a good spark, fuel is flowing thorugh the nozzle, but no fire. If I press my finger over ...

I am having trouible starting. Idle for several years Service agent or change the flame failure device. make sure gas is turned on, clean out pilot jet..

mr heater and the spark ignition doesnt work . do i have a bad circuit board? Hi clean the flame senser blow the dust out of the heater check the fan switch might be dusty jump out pressure switch see