Question about Milwaukee Tool Heating & Cooling
my Master forced air kerosene heater fan motor hums but wont turn over, I tried replacing the capacitor with no luck. Do you know what the problem may be Be sure you replaced the capacitor with an ...
Question about Master Heaters Heating & Cooling
What is the function of the motor relay on my master 110,000btu heater The relay,capacitor,or overload has an ID # Murata 60 PTH491A01 AS3RN160. The Motor does not start strong after multiple starts. ...
heater wont start makes buzzing sound I took cover off. turned fan manually really stiff moter then had to spin while turning unit on then fan started.do i just need to replace the brushes or do i ...
Question about Master Heaters Heating & Cooling
I have 2 new Master Heaters, model MH135KTFA. Both had the air pump rotor shatter before the first tank of fuel was through. Replaced rotors, checked clearances, and they both failed again, Any idea w
fan won't turn, only when power is ON When turned on, you can hear the motor try to turn, but the blades won't turn. when power is off, fan blade turn freely. turn the power on while fan is turning ...
I NEED A BLOWER MOTOR Have you contemplated a "Rewind"? It's far cheaper than a new motor, and will work great. Find a Motor rewinder, ask for a "Quote" and go from there. Motors are sort of ...
Question about Master Heaters Heating & Cooling
when you plug it in asoon as the thermostat kicks on the motor hums then starts and runs bacward. If you spin the fan the correct direction when it is humming it will sart and burn properly. I do live
motor blows igniter works but will not fire The motor you are hearing may just be the inducer motor, this is the one that creates suction in the system before the gas is released/ignighted. If the ...
Question about Heating & Cooling
I have a Master kerosene/diesel forced air heater. When plugged up the motor just hums. The fan turns freely until plugged up. Can I oil the motor somehow? I don't think so. Not unless the electric ...
how do I adjust the rotor to the pump on a Master B 150. Before setting the gap make sure the motor does not have any motion in the shaft indicating a worn bearing. If so, the motor must be replaced. ...
389 questions posted
Usually answered in minutes!
354 Questions
85 Questions
73 Questions
62 Questions
44 Questions