eject from machine entirely. Solution: Replace "Off White" paper ejection roller with new "Grey" paper ejection roller. Cleaning the "Off White" roller will not resolve this problem. Problem: Displays
Question about Sharp Office Equipment & Supplies
When receiving, the machine ejects extra blank sheets. Example: On a three page fax, first I receive page one, then a blank piece of paper, then page two, then another piece of blank paper, then page ...
Question about Panasonic Office Equipment & Supplies
I bought a panafax-uf790 about 2 years ago. Now I am having the worst paper jam problem. It would always stop at the same place and record paper jam. I've constantly remove the paper and it keeps ...
...round hole on the front of the drive. By pressing the clip in there, you will force the drive to eject. -David. Opening the cd drive of your computer is done by pushing the eject button of the ...
does not eject sheet i have a brother intellifax 2800, it copies well but i will not eject the paper all the way out, it stope about 3/4" from the edge of the paper, can someone help greg In the ...
...2nd registration sensor, and/or manual insertion sensor remains ON.) ( 84 Paper jam. The paper ejection sensor remains ON. ) ( 85 No paper cassette loaded. ) ( 86 No 2nd paper cassette loaded. )
...or stained -- replace with clean white paper. 2. Paper was pulled from machine before the fax was ejected completely. 3. The received document support is not installed correctly. Page 3 in the ...
Question about Brother Office Equipment & Supplies
I have a brother fax 2920 that keep wrinkling the paper. The problem is most likely that the eject area is fouled. Other than that clean the rollers especially the last roller in the chain with ...
Question about Brother Office Equipment & Supplies
Brother MFC-7225N. Off and on for the last couple months pages will get jammed and come out looking like an accordion. You need to replace the Paper Eject Roller LM4105001 on the machine
Question about Ricoh Office Equipment & Supplies
my photocopier machine stacks the paper at the last end of ejection point fuser problem or exit unit. Clean all the rollers in that area w/ alcohol isopropilico or a RAG of soap and hot water(not too ...
48 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions