sewing reinforcement stitches, the needle will sew in the same place. 5. Remove bobbin and clean the bobbin area. Reinstall bobbin. 6. Turn the machine off and hold the reverse button for 3-5 seconds.
Question about Singer Sewing Machines
...machine is sewing in reverse direction only. Reverse lever not affecting the direction of sewing. hi there. go to this forum and have a read up on what might be wrong. Looking for advice my sewing ...
husband checked and found a bunch of lint and dust, he removed it and oiled it. My machine now works like new. Also sometimes the spring that operates reverse button can break or come loose. Good Luck
Question about Montgomery Ward Sewing Machines
...sewing machine. The reverse button has no tension and the machine is stuck in reverse stitch mode. Can this be repaired? You may want to take it for service. Could be the machine has seized with the ...
Question about Brother Sewing Machines
...sewing and my machine would only sew backwards. even when I press the reverse button. I tried taking out the bobbin casing and cleaning nothing worked. Make sure that the reverse button isn't stuck ...
...sewing button stuck HELP!! Model 6430 Viking has the reverse button located in the center of the stitch length dial. It is firmly jammed in the reverse position causing the machine to sew ONLY in ...
Question about Sewing Machines
...sewing machine that was working 2 years ago. It is now stuck in reverse.the stitch selector knob will not turn either. It will sew in reverse. how to free up the button and knob. Stitch selector knob ...
Question about Montgomery Ward Sewing Machines
sewing machine. The start/stop button does not work. How can this be fixed? There could be several reasons why the start/stop button on your Montgomery ward computer 2000 sewing machine is not working
The push down button for reverse is stuck and will not reverse. How can I fix this? Just buy a replacement push button from Brother Sewing Machine dealer.
Question about Singer Sewing Machines
sewing machine. Made a button hole and now I am getting a C2 error message saying that the button hole lever needs to be raised. It is raised, I think it is stuck . Perhaps you are correct. Amazon com
73 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions