inside edge of the top front - that is the control for the brightness/darkness control of the screen. Thank you for this solution. I thought I knew everything about this machine... lol. Sincere thanks
...control image will flash then stop on the screen. I took it back to the dealer and they replaced it with a new foot control.It is now 7 months later and it is happing again. When I turn the machine ...
Question about Janome Sewing Machines
...screen without sewing. Stuck in a start up loop. Does it need reset? Shut power off for an hour. Cleaned bobbin area. Retreated unplugged foot control. Tried various sewing options. you can try doing ...
Question about Husqvarna Sewing Machines
control. I just opened my Jade 20 machine. The screen shows number 1. Trying to find a bobbin but SP does not show up on screen as manual suggests. Stop and start buttons do not work. Actually none of
...screen and beeps. A problem with the control panel: The control panel may have become damaged or malfunctioned, causing the black screen and beeps. A problem with the control board: The control board ...
Question about Brother Sewing Machines
CS6000-i E5 showed on screen, now my backstitch doesnt work. Is this an adjustment I can make? The start/stop button was pressed while the foot controller was connected. Disconnect the foot controller
Question about PfaFF Sewing Machines
...screen went dark. The machine will still sew straight stitch but can't change stitches. Most likely a computer component that controls the screen has failed. May or may not be an expensive fix--check ...
Question about Elna Sewing Machines
Elna 9006 Envision Sewing Machine. On my sewing machine's computer screen, can the screen lights be repaired? The screen is almost black. Question edited for correct maker name and to what I think you
...screen went black and shut off. I turned it off and back on again, and sewed for a few minutes until it cut off again. This repeated 3 times. Yesterday, I turned it on and the machine sewed for ...
Question about Singer Sewing Machines
WHAT CAUSES MY SINGER LEGACY SE 300 SEWING MACHINE TOUCH SCREEN TO STOP WORK. 1. Screen failure 2. Control board failure
422 questions posted
Usually answered in minutes!
764 Questions
294 Questions
223 Questions
181 Questions
150 Questions