Brother XL-3510 Mechanical Sewing Machine "put bobbin holder back together" Questions

Ad

...put bobbin attachment back together and then....thread a bobbin! lol I pulled bobbin holder out then released the two slot holders either side...that allowed the whole section to come out. Can't put ...

Ad

...put the bobbin case back in to the shuttle holder, mine keeps falling out? The assembly that holds the bobbin in place falls out and I don't know how to put it back together so I can sew a shirt? ...

Ad

Question about Singer Sewing Machines

2 Answers

...put the bobbin holder back in. I have a Singer model #4562. I thought maybe the bobbin holder was my problem. Perhaps a video here may help: Singer 4423 Bobbin Threading The metal bobbins have a ...

Question about Brother Sewing Machines

2 Answers

...bobbin holder is positioned properly or it may break off a tooth. Once I replaced the screw and put the machine back together, it picked up the thread with no problem. Hope this helps. See if this ...

Question about Sewing Machines

1 Answer

...put it back matching the red markings on the bobbin holder and the stopper, rethread and start over. I have bought two new bobbin cases too and taken it back to the dealer a couple of times over 5 ...

Question about Singer Sewing Machines

1 Answer

should it be turned... The plastic bobbin case should sit on top of the raceway, it should slot in quite easily, once the bobbin case is in put the small metal clip at the top over to hold it in place

PUT THE BOBBIN IN BEFORE YOU START TO SEW. Sounds like you are describing the hook. Perhaps the owner's manual would be assistance. We don't know the make/model of your machine so are really unable to

Question about Necchi Sewing Machines

1 Answer

...the bobbin holder. It was stuck so I had to force it out, replaced the needle., and put the bobbn componants back together then it worked fine. Also make sure the machine is oiled ...

Put bobbin into holder and thread through the little clasp thing on the holder. Now pull the cotton slowly while holding the bobbin and the holder together. There should be some tension on the thread.

Question about Janome Sewing Machines

1 Answer

put the bobbin into. It has possibly dislodged if you've had a jam up. You will need to unscrew the two screws holding the needle plate down, take out the needle and pressure foot to give yourself

Not finding what you are looking for?
Brother XL-3510 Mechanical Sewing Machine Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...