...stitch in place but that frequently causes a knot on the underside of the fabric. You can also tie the thread tails together (especially when sewing fine fabric like chiffon, silk, etc.) and clip the ...
White 3100 just knots in stitching When sewing anything, the machine just stitches knots and skips. Called the manufacturer's troubleshooting line and they suspect the timing belt. Is this easy to fix
...knot- instead of sewing stitch after stitch... seems to be skipping and knotting and nothing else. Easy to fix myself - don't feel like I got very many uses from the machine before this happened but ...
...quilting by hand, how do you end the stitch? Have you tried (needle still on) making one knot close to the fabric. Pull gently and the knot will go to the inside. Take one stitch; trim your
Question about Husqvarna Sewing Machines
What is the cause of thread knotting up and not continuing stitches? The first few stitches appear to be find and then thread knots. Check if machine is threaded correctly and that bobbin is in ...
Question about Janome Sewing Machines
...stitching too many times in place always create a knot because there is nowhere for the excess thread to go. Most newer machines with a built in locking stitch take only 2-3 stitches in
Question about Bernina Sewing Machines
Bernina Aurora 440 knotting below my fabric and into bobbin area. Every time I start sewing, the thread gets tangled up on the bottom of my project and tugged down into the bobbin area, breaking the ...
the thresd gets knotted and it won't stitch the thread gets knotted and it won't stitch Rethread your machine Make sure your cotton runs through the two tension plates Check that your top tension is ...
...stitch that is formed has multiple, knotted loops on the lower side of the fabric. I cut the knot, redirect the bobbin thread through the pressure plate and begin stitching again. It works for about ...
52 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions