Brother MFC-8460N All-In-One Printer "stop envelopes jamming" Questions

...stop halfway through and then jam. If it does catch the envelope, often it will take two envelopes at a time. Please help. This is a replacement 8460, since the first one had similar problems - it ...

printer does not discharge paper when done All of a sudden my printer has stopped sending the printed pages out. I can remove the paper tray and pull out the page, as long as I am only doing one. ...

stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor

sheets feed fine When I say jam I don't mean crumpled, I mean the progress through the rollers just stops and I need to open the hood and put the envelope out by force. I have had varying success with

stop printing is there is an error, check for any paper jam before printing. Take note of the error message and locate the exact jam. Use the manual feeder when printing on envelopes. You may click on

Paper jam error, will only print envelope. It will start to feed in the paper, then stops and say "paper jam". I have cleaned it and blew it out with air. It will only print envelopes.What else can I ...

...with some masking (or similar) tape to make it smoother. Not sure about envelopes, but this has stopped copy paper jams, so worth a try. If it doesn't work for you...easy enough to remove the

...sometimes gets left behind and gets shunted onto the sidewall of the printer by the carriage, which stops the carriage reaching its full travel and throwing up an error, rendering the printer unable ...

...envelopes until the guides stop.5. Select the appropriate options.• On -Paper/Quality- tab select a Plain paper type.• Click the [Advanced] button, and select the appropriate envelope size from the ...

My Brother 8480DN will not accept envelop The envelop starts to feed, then stops. I get jam message, but there is no jam on most printers you have to reset the paper thickness for envelopes or it will