Brother MFC-8460N All-In-One Printer "ext line back fax" Questions

...The person sending me the fax said that it just continued to ring. There are two places to plug in a phone line in the back, one says Line and one says EXT. Which one should I be plugged into? ...

...line quality. 2. Hook a phone to the Ext jack in the back of the machine. Pickup the phone receiver, got a dial tone then dial the fax number. I heard the other fax machine answer the ring and the ...

...wire is plugged into the line jack and not ext jack of the machine, and should go straight to the wall, without splitters or extensions. If you still cannot send a fax, try another wire or ...

...from the wall and plug it directly to the back of the machine where it's written LINE. And if you want to also receive phone calls, you can run a cable from the EXT. port straight to your ...

...LINE jack? If it was accidentally plugged into the EXT jack (for extension phone), it will allow you to hear the dial tone and dial, but as soon as you press Start, it cuts off the extension phone, ...

line telephone to the 2-Ext port on the back of the HP fax product. Figure 4: Fax and telephon 1 - Telephone jack2 - Two-wire telephone cord to 1-Line Connect a single-line telephone to the 2-Ext port

...Line" and a grey one marked "2-Ext". It seems we have tried EVERY combination to get it to work and have been unsuccessful. (We are moving and had to temporarily move the All-in-One across the room. ...

...Line 1 Ext at the back of the printer port. Place the document face down on the Scanner Bed Or place the document face up on the Top feeder if you want to use it. Use the right arrow key and choose ...

Line port at the back of the printer and answering machine should be connected to EXT. port from the back of the printer. Make sure on the fax setting on the printer that you have all the info already

...LINE at back side of the printer,also you may connect an extension phone to the socket marked as EXT. Put the document face down ward at platen glass and face upward in the ADF. Select the key marked ...