...I cannot completely download the driver software for this printer, It freezes at 'plug in cable and turn machine on'. I do this and nothing else happens. Can anyone help me? Thanks!! I can give you ...
Question about Brother DCP Office Equipment & Supplies
when turned on the warning light fashes and then the machine turns itself off your printer is at risk. look for a jammed inside the printer or anything that cause clogging. clean it and reset.
71 print unable error Turn the machine off. Unplug it. Wait a moment. Plug it back again and turn it ON.
...if the Status light is blinking Red, the printer is reporting an internal failure. Try turning off the printer and then turning it back on after a few seconds. Another reset to try: ...
Question about Brother DCP Office Equipment & Supplies
...even after it is closed and all steps to clean any paper jam are done... Try doing a power reset. Turn off the printer/Unplug it for a few minutes/Plug it back in/Turn it back
DCP-J315W shows "Unable to Init 4F" Turn off the printer and unplug it from the power. Then press and hold the power button for 1 minute. Now release the button, plug in the printer and turn it on and
machine error 50 On a Brother printer Error 50 typically means that the Fuser is malfunctioning. Turn the printer off for about 5 minutes. Then turn the printer back on and wait for about 10 minutes. ...
Question about Brother DCP Office Equipment & Supplies
accidentally turned off computer printer now not working.. Printer wont work now.... windows make loads of hardware errors, if it is not being picked up by the computer but the printer is turning on ...
Question about Brother DCP Office Equipment & Supplies
Refilled ink cartridges, printer reads no ink and Refilled ink cartridges, printer still reads no ink and therefore will not print. Have tried taking cartridges out and putting back in. And turning ...
...error 02:10 Explanation A problem has occurred with the carriage assembly. Recommended action Turn the printer off and allow a few minutes for printer to cool. Turn the printer on and attempt
290 questions posted
Usually answered in minutes!
422 Questions
374 Questions
395 Questions
242 Questions
120 Questions