Question about Brother HL Office Equipment & Supplies
paper jam. Let printer "cool down" overnight. Status light still red. Drum has never been replaced. Toner light is on. However, in the past toner light has never triggered a red status light. Well, if
Question about Brother HL Office Equipment & Supplies
toner/drum assy. and headed for the fuser. Open up the printer, stopping it, and pull out the drum. If the paper is past the drum and headed for the fuser, look to see whether it has those lines on it
...toner AND ordered 10 reams of 24# paper. This printer STILL jams constantly. When I am closing the month there are some reports that will print only once. I cannot tell you how much data I have lost ...
Question about Brother HL Office Equipment & Supplies
...toner to the paper but I doubt that one because it usally leaves lumpy marks on paper surface, but you could get a touch and look at the two width of the machine rollers at the rear and see if the ...
toner,drum,paper and ready led lights are all flashing this is a new unit Hi from what i have read on the internet and past experience with these printers (our company has 20 -30 of them) the fault is
Question about Brother HL Office Equipment & Supplies
...paper when it rises). Disconnect the power and remove the toner/drum. Turn the printer upside down and remove the rollers from the purple plastic arm (shove the arm ahead to make this easier). Once ...
Paper tray noise. Has nothing to do with toner cartridge. It appears to be the gears on the paper tray not meshing properly. Any thoughts? I actually fixed mine. I found this post and it did not fix ...
...paper make it past the toner cartridge? I have seen toner cartridges lock up and cause this type of problem as well. If the paper isn't making it past the toner I would try replacing the cartridge ...
paper. Toner scraped from one area and builds up in another area.....scraped area has no toner....looks like the paper with toner is moving past something before it is fused and that something scrapes
Question about Brother HL Office Equipment & Supplies
Paper prints halfway but jams at top roller Printing starts fine then I hear a crunching noise. I have to remove toner cartridge and pull hard to get partially printed page out (all the toner is not ...
488 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
249 Questions
188 Questions