Question about Brother HL Office Equipment & Supplies
clear tape. Fourth, re-install the toner cartridge into the drum assembly. Last, put the complete unit back into your printer. This worked for me. Yes, it will stop printing when toner is out. Replace
Question about Brother HL Office Equipment & Supplies
...toner, paper and drum lights are not lit. The red lite indicates one of the following needs to be looked at: Cover open (Front cover) Close the front cover. Cover open (Jam clear cover) Close the jam ...
...clear the toner light). Is it a recycled toner cartridge as some of the are badly refurbished and they don't always reset the Toner empty indicator on them, (its a mechanical gear on the side of the ...
Question about Brother HL Office Equipment & Supplies
clear plastic plugs and when the toner goes below these plugs that causes your printer to say your out of toner even though your not. Therefore if you tape over these clear plugs, then you can squeeze
...clear : With paper loaded, new toner in, Open front door Turn off printer While holding down the GO button, turn printer back on When all four LEDs light up release GO button. All LEDs will turn off ...
...toner end-of-life error condition. Perform the following to clear (I have 120 in the field so I know it works!): With paper loaded, new toner in, Open front door Turn off printer While holding down ...
Question about Brother HL Office Equipment & Supplies
...toner. You will see on each side a round clear little "window". Cover this (both sides) with tape, masking tape works well, just not anything clear like scotch tape, that won't work. We are tricking ...
Question about Brother HL Office Equipment & Supplies
...toner light I have a Brother 5240 printer. The toner light went on, so I replaced the ink cartridge. Then in just two weeks, it went on again. I replaced the cartridge again, thinking that we printed ...
Question about Brother HL Office Equipment & Supplies
...clear tape. Fourth, re-install the toner cartridge into the drum assembly. Last, put the complete unit back into your printer. If this still not work, get a new brother 2140 toner then. You should ...
Toner light won't clear and the printer won't pring. The same thing happened to my old HL 1440. I got exactly the same problem and the "reset" didn't do anything. I fixed it by putting a piece of duck
488 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
249 Questions
188 Questions
