Question about Brother MFC Office Equipment & Supplies
...fuse, two actually, inside the unit. My 7820N died after a power surge. here is how I fixed it. unplug the power cord raise the glass/ feeder assembly open the front cover and remove the toner ...
...do I replace the fuse? I don't see any large metal cover over the power supply. How do I get to the fuse? does your printer have no POWER when you turn it on? do you mean fuse or fuser??please ...
fuse cover? The Fuser is the heating element, it's in the back. On that model I believe if you open up the rear cover (door) there will be another kind of cover/door possibly with a light green or
cover and replace tone you can use reset gear with follow structure: http://reset.vn/reset-hop-muc-may-in-brother-mfc-7470d.html There are various types and polarities in toners and therefore you have
functional error SC548-00 SC548: Fusing unit installation error - Definition - The machine cannot detect the fusing unit when the front cover and right cover are closed. - Possible causes - ? Fusing ...
...cover, you can see the Low vol power supply, check input 220V/110V(depends power standards) fuse. If fuse burnt check primary section is there any component failed? replace same rated fuse the ...
how to remove fuser from a 13 how to remove fuser from a konica minolta 1350w. I removed one side of printer can not figure out how to release other side (right) (3) Replacement of the Fusing Unit 1. ...
sc548 The machine cannot detect the fusing unit when the front cover and right cover are closed. Possible Causes ? Fusing unit is not installed ? Poor fusing unit connection Inspect that the fusing ...
Can power on Check the fuses.Blown fuse conditions FU1 - 6,3A Doors/covers open is displayed. FU2 - 6,3A Doors/covers open for the finisher is displayed. FU3 - 4A paper end condition. FU4 - 6,3A SC ...
Question about Brother MFC Office Equipment & Supplies
...right. Unplug two cables. Open right side cover and unplug two small connectorson the right of the fuser. Then remove two screws from the bottom of the fusing unit. and it should come ...
270 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions