Brother MFC-3240C All-In-One InkJet Printer "encoder strip" Questions

encoder strip on brother fax machines? I am familiar wih some inkjet models. The encoder strip would usually be behind the ink cartridge carriage. It is a thin clear plastic strip across the length of

...encoder strip out of alignment.hen you open the printer so that you can see the print head, move the print head with your hands, pull it to the middle. The space immediately to the front of the ...

encoder strip How to clean brother mfc 420cn encoder strip. I'm getting a Failure to initialize error 50 after cleaning the print head. The encoder strip is barely visible thru the top in front of the

...encoder strip out of its slot. It is making the printer think paper is still jammed. Try gently pushing the strip back into the slot. You might have to use a screwdriver or other thin instrument to ...

...encoder strip. Unfortunately there is no easy way to reach the encoder strip to clean it without taking the machine apart and putting the machine back together after you take it apart is not easy. ...

...Encoder Strip being dislodged from the sensor mounted on the Print Head/Carriage Assembly. The upper case assembly will need to be opened, and the encoder strip will need to be put back into place. ...

...Encoder strip, inside the machine. If you are experiencing ghost printing from your Brother Printer machine, please follow the steps below to clean the Encoder strip. Note Markings and debris can ...

...the correct position in the print head when you release. You can feel this with your fingers. Power back on and the problems will be gone! Remember and be gentle so as not to damage the encoder

that the encoder strip (foil paralell to printhead belt) might be out of position. The jammed paper hamight had pushed the encoder out of position. the encoder strip has to be fixed upon the printhead

...encoder strip. I've been searching around on the internet, but I didn't find anything for this machine. Only all HP models and some of Epson.I hope someone Encoder strip got broken, I need to replace ...