Question about Brother MFC Office Equipment & Supplies
...ADF, or top cover. Try to copy again. If it is still there then there is either something on the scanner piece that moves back and forth to scan or one of your scan LEDs is burnt out and the scanner ...
...cover held on by one screw, this opens up the compartment that has all the connections from top unit to bottom, there are scewered in earth cables about 8 plugs, two ribbon cables, all need to be ...
ADF, then open the Document Feeder Cover. 4. Raise the Paper Release Lever, then remove the jammed page from under the roller to the Document Feeder Cver side. 5. Pull out the jammed document from the
Question about HP Office Equipment & Supplies
ADF cover NOTE: Remove all originals from the ADF tray before you open the ADF cover. 1. Open the ADF cover, and then close it again. 2. Press the OK button. * If still a problem, go to the next step.
...ADF, then open the Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed ...
...for detecting load paper in the ADF section. Check if there is something that keeping it stuck in that position. You will need to open the cover of the ADF section to do this. Hope it
...ADF folder and wrapped around the rollers when the cover is opened Most probably the rollers are sticky. Try cleaning the rollers with fibre cloth soaked & squeezed dry. Use a blower to clear any ...
Question about Brother MFC Office Equipment & Supplies
...ADF. Close the feeder cover and press OK to eject document. I don't want to eject the document -- I want to print it! Please advise. Canon Pixma MX330, ADF error, Code : 2,103,0 Here's what I found. ...
Question about Brother MFC Office Equipment & Supplies
cover of the ADF and look for a rectangular hole with a lever stuck down. That lever should only go down when a paper is placed in the feeder, and sometimes they get stuck in the down position. A bent
...ADF, Close feeder cover and press OK. Rebooting does nothing...the printer remains in this repeating loop and there is not a thing stuck or inside it. Hello, The sensor may be dirty even if it looks ...
843 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
406 Questions
381 Questions