Question about Brother HL Office Equipment & Supplies
...off and on how do i set the toner reset lever on a brother hl 5250 printer I bet it's remanufactured, yes? The toner reset lever has probably not been properly set on the cartridge -just a
...reset lever' has not been installed or replaced. If you look at the side of the toner unit, you will see a sort of 'half moon' notch, that should have a white coloured lever within it. This lever is ...
Question about Brother HL Office Equipment & Supplies
Reset lever? The initial cartridges that came in the printer didn't have them. On the left side of the new cartridge (if you're holding it as if you were going to install) you should see e white lever
...and one lever for the high yield cart. It sounds like the gears were not reset on the cart. Is the cartridge brand new, or remanufactured? I can give you more info on how to reset the
Question about Brother HL Office Equipment & Supplies
...reset by holding down go button. Is the printer dead? Try this.. 1: Turn off power and remove toner/drum2: Tape the little spring loaded lever just inside the printer on the upper left hand side in ...
Question about Brother HL Office Equipment & Supplies
...reset lever on left front of cartridge and reset to original position if you want to get just a little tecnical One sctew carefull gears fall off ,white lever needs to be fully to rear of slot to ...
Question about Brother HL Office Equipment & Supplies
...reset the drum and the light still flashes and I can't print, this is for a brother HL-5250DN printer Try this.... 1: Turn off power and remove toner/drum2: Tape the little spring loaded lever just ...
...Reset lever to far right side with arrows lining up. Set the drum and cartridge aside. Remove the paper tray and look inside for a jammed sheet of paper. Flip the back lid down and check for paper. ...
...reset the lever on the cartridge. Problem is that the 'original' cartridge doesn't have that lever with gear assembly, so you have to buy it from someone else ($10). I also tape over the little ...
Question about Brother HL Office Equipment & Supplies
...reset lever' has not been installed or replaced. If you look at the side of the toner unit, you will see a sort of 'half moon' notch, that should have a white coloured lever within it. This lever is ...
288 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions
