Brother MFC-8840D All-In-One Laser Printer "top feed keeps jamming" Questions

...feed always try seting the paper to A4 not leter I have an MFC-8890DW that had a small piece of paper jammed inside the ADF (automatic document feeder). I could use the printer since it was in a ...

...top loaders. This 'separation pad' rubs against the paper feed roller, so if you find the pad, you've found the roller. Clean it and your jams should stop. Three Roller Paper Separation ...

...feed. The paper being copied rolls down to the flat panel area instead of winding up in the tray on top. Please let me know how to fix, or do I need to take it in to a repair center? Thank you Steve ...

...top of the copier lid it often will work. The lid does not seem to sit level - it is slightly higher at the back then the front. We just replaced the back left hinge - the feed problem seemed to ...

...feed wheels to hold back all the sheets, except the top one. This one doesn't have that, so we'll try a couple other things. Pull the tray out and remove all the paper. If you're reusing old paper, ...

...top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever. Printers & faxes sense ...

...feed and I get a message that I have a paper jam - sometimes the two top cards will just "break" off and it just keeps printing over and over and over on the same two cards. I have wasted more cards ...

...feed the heater. they plug into a connector that is in the left side of the printer. Pull the connector out, and you will see on the top or bottom side of the connector, a clip that holds these ...

...feed problems you are ... For detailed instructions on clearing paper jams, see Clearing print media jams.Missing: impact ?s301 How To: Clear a Paper Jam on a Top Feeding Lexmark ... ? 2:30 ...

...feed at all. I feel sure it needs repairing and don't know where to have it done. Yellow pages? Open the top where you exchange the cartridges, then check to see that those little cogs keeping the ...