Hotpoint First Edition FEW12 Front Load Washer "sounds ball bearing spinning" Questions

sreeming noise as it spins sounds like ball sreeming noise as it spins sounds like ball bearings Drum bearings is quite a costly fault to fix Bearings come in Half Drum to fit..£70 Parts...

...sounds like a large bolt is spinning around washer shakes spin cycle really fast scrapeing noise The scraping noise is the grinding noise from the worn out ball bearings. Replace them. You can open ...

...sounds like a ball bearing nothing in lint trap or in drum. rattles during spin cycle. rattles if you manually rotate drum from side to side. sounds like a marble rolling around its the inner baskets ...

...sounds like there are several ball bearings rolling around between the drum and the outer housing. Is the shaft bearing mounted in the rear outer housing going bad or is it possible that some coins ...

making grinding sound when spinning finding little ball bearings on floor Bearings gone. Do not use as too dangerous. A job for an expert.

...- sounds like the ball bearings are wearing off. Is there a way to fix this? How? Yip could well be drum bearing failure, itss quite a big job / expensive......Depending on age may not be

sounds like bowling ball when on spin cycle sounds like the bearing have worn out,to check for this open door and with your hand lift the inner chrome drum up and down a few times ,now if you feel a ...

...ball shape at one place. otherwise it might be bearing or bearing housing. bearings are very difficult to replace as whole drum need to open. if bearing housing got loose in drum then drum needs ...

Sounds as if there is a ball bearing behind the drum that I cannot get to. I have checked the vanes and anything that I can actually see to figure out how something got behind the drum. The drum spins

...bearing seem ok then push down on the tub ring and try to push the tub and basket down it should take quite a bit a pressure to push the tub down is its easy and you can bounce the tub up and down it ...