Hotpoint Ultima WF865 Front Load Washer "change drum belt aquarius" Questions

change hotpoint drive belt un plug appliance, remove lid and back plate, place belt on motor and carefully on drum pully, turn pully to pull belt onto its, its quite tight to do but is possible, watch

drum wont rotate, is it belt driven from the motor, if so how do you get in to change? cant get lid off take the back panel off to get to ure belt, but first put ure hand inside ure machine n spin the

...machine . the belt appears to short even when ive loosened the motor right off can you help me please the belt seems to be too short, how can i get the belt on the motor and the pulley on the

...drum from a Hotpoint WM64 washing machine? I need to change the bearings. Remove top cover and rear panel. Remove belt and drum drive pulley.Remove clamp that secures door seal Remove top control ...

...drum manually (by removing the top and using the belt) The machine then carries on with the wash for various periods of time before tripping the electric again. Could you offer any guide as to the ...

...cable tie at 11 o'clock position. Pull round once more and the belt will jump on. Turn it all back and remove the cable ties. Check the belt position is good and not slipping down between

...change worn bearings the shaft will get scored eventually and it's a much more expensive job. Slip the drive belt off and turn the drum by hand. If it's quieter now, then the motor bearings are ...

...drum are shot. These things hardly ever need a new belt. That aside, I hope you have good reason to change the belt and there is the (Easy) way to do it. UNPLUG FROM THE POWER SOURCE!! Take the lid ...

...drum has difficulty in moving. I the stop the machine and take some more clothes out, it then does run smoothly. I now put less and less clothes in my machine, could you please solve my problem. Does ...

...the appliance down and remove the inner drum to try and change the bearings and the inner drum support. This is a major strip down of the appliance. Hope this helps Thanks for contacting ...